Daltile Ayers Rock Porcelain Tile

Price from
$6.09 sqft
SAVE
25%
$97.44 case, covers 15.99 sqft
reg: $8.12 sqft
case: $129.92

Random variation
AVAILABLE FOR ORDER
Ships between Jun 5 - 7
Color: roll over image to magnify
Solar Summit
Golden Ground
Bronzed Beacon
Majestic Mound
Rustic Remnant

13 tiles per case
13" x 13"
Accessories for Daltile Ayers Rock Porcelain Tile
Transitions tile flooring from the floor to the wall
Bullnose
3" x 13"
Color:
Qty:
$16.99 $22.65 Weight: 1.00lbs
Transitions tile flooring from the floor to the wall
Cove Base
6" x 13"
Color:
Qty:
$19.99 $26.65 Weight: 1.00lbs
Fills the corner where cove base come together
Cove Base Outcorner
1" x 6"
Color:
Qty:
$19.99 $26.65 Weight: 1.00lbs
 

Description - Daltile's Ayers Rock provides a luxury looking slate floor with the durability of a porcelain tile. Reveal imaging captures the unique textural look of natural stone for the ultimate low cost slate look. The beautiful color options and random shading from tile to tile create a flooring unlike any other.
Material – Glazed Porcelain.
Size – Available in 13" x 13", 13" x 20", and 20" x 20" tiles.
Thickness – 3/8" (9mm)
Shade Variation – Random (V4)
Minimum Grout Joint Recommendation – 3/16” (when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%.)
Application – Floors, walls, countertops.
Breaking Strength – >450 lbs.
Case Weight – Each 13x13 case weighs ~62 lbs, each 13x20 case weighs ~50 lbs, and each 20x20 case weighs ~52lbs.
Origin – Made in Italy.
Recommended Uses – The Ayers Rock collection has been installed in a variety of residential and commercial applications, such as waiting rooms, offices, conference rooms, cafeterias, breakrooms, bedrooms, hallways, mudrooms and more.

  • Daltile flooring typically ships within 6-8 business days and typically delivers within 8-13 business days.
  • Once your flooring ships, an email will be automatically sent to you with your tracking information.

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.

General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.

For printable warranty information, please Click Here.

Highlights

  • Realistic slate look.
  • Highly durable porcelain floor tile.
  • Features Reveal Imaging.
  • Adds a touch of elegance and nature to any room.
  • Combine sizes and colors to create a unique pattern.

Videos

How to Install Floor Tile

Top 5 Tips for Installing Large Format Tiles

Shipping Video

 

Customer Questions & Answers

Don't see what you're looking for?

Ask a Question

 

Verify that you are human, choose: Monitor

CANCEL

Want immediate answers?

Live Chat! Get assistance from our sales team! 
Color:
Qty:
$0.00
$0.00
< Return to Product