How difficult is it to cut to fit a smaller area?

Since our 3/8" Equipment Mats are vulcanized, they are a little more difficult to cut compared to our non-vulcanized mats. You can still cut them pretty easily with a sharp utility knife and a straight edge, but you will just have to do a few more passes to cut all the way through. The steps to cutting the mat are to measure twice before starting your initial cut. The first cut will be more of a score than a true cut to get the blade line set into the material. Once you have scored the mat, you will then want to make a few more cut passes until you are all the way through the mat. Typically after the initial score cut, it takes about two to three passes to cut through these mats.