I�m building a mini golf hole in my backyard. I need one 15 x 20 ft roll of the putting green turf for the putting area. The start of the hole to the main putting green measures, at it�s widest 7 ft x 24 ft and runs on a curve to meet up with the lower putting green on the 20 ft side of the turf. My question is about grain direction. I will have to join the two together and I�m wondering if the grain direction will be different and if that matters when seaming the edges together? I can send a picture if necessary.
The best way to match grain direction between two turfs before you join them together would be by laying out a section of �