Description - Our extreme rubber tiles are designed for extreme durability and maximum shock absorption. These molded tiles are available in corner, border, and center tiles and can be used indoors and outdoors. The heavy weight and interlocking design of each tile allows for the tiles to be loose laid which means an adhesive is not required for installation.
Note: Tiles have an unfinished bottom which may result in a variation in height.
Material – Recycled crumb rubber and colored EPDM rubber flecks. Crumb rubber comes from whole recycled tires which helps ensure that those tires don’t end up in landfills.
Size – 30" x 30"
Thickness – 3/4 Inch
Weight – 25 Lbs per tile
Recommended Uses – Extreme rubber tiles have been used successfully in commercial gym and fitness facilities, home gyms and exercise rooms, at power lifting stations, Olympic lifting facilities, body building studios, any place where spike protection would be useful such as locker rooms and dugouts, in outdoor storage sheds, places where free weights or other heavy objects may be dropped or any place where a non slip surface would be useful.
Available For Order - Ships between Dec 2 - 9
Extreme Rubber tiles are a piece of cake to maintain and keep clean. Cleaning of these rubber tiles typically consists of:
- Vacuuming the tiles when necessary to remove loose or dry dirt, dust, or debris.
- Periodically damp mop the floor tiles with a mild soap and water solution. A couple of recommended soaps are Dawn dish detergent or Tide laundry detergent.
Note: Do not use any solvent or oil style cleaners such as Pinesol, Lysol, Murphy’s Oil Soap, WD40, paint thinner, etc. since these types of cleaners will break down the flooring over time.
For more detailed cleaning instructions and commercial cleaning instructions, Click Here.
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add borders tiles outward along the adjacent walls. Add center, corner and border tiles where you see fit.
- After the field is covered, go back and cut in tiles along the opposite walls in the room. It is recommended to leave a gap along the wall roughly the thickness of the tiles being used to account for expansion and contraction of the floor in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.
For printable installation instructions, please Click Here.