Description - Raised Grip-Loc tiles are built to create a very durable and slip resistant surface in high traffic areas. The tiles feature a textured top design for added slip resistance and support towers to create a free draining surface, which allows water to flow freely underneath the tiles. These tiles are not only capable of handling extremely wet and uneven flooring surfaces, such as those found in locker rooms and showers, but they are also capable of handling extremely wet countertops, such as bar shelves and restaurant drying stations. These tiles are resistant to bacteria, fungus, mold, and mildew. Since these tiles are made from commercial grade EVA, they are stain resistant, and odorless. Installation is as easy as snapping together adjacent Raised Grip- Loc tiles to form a beautiful and customizable surface. Raised Grip-Loc tiles also come with an industry leading 10-year warranty.
Material - Constructed of high quality EVA (Ethylene-vinyl Acetate), this extremely durable and flexible thermoplastic copolymer ensures color fastness, UV stability, and chemical resistance.
Size - 12" x 12"
Thickness - 1/2"
Weight - 1.0 Lb per tile
Recommended Uses - Raised Grip-Loc tiles are truly built to be a multi-use durable floor tile. These tiles are most commonly used as locker room tiles however they have also been used successfully as a flooring option in showers, boats, laundry rooms, kennels, and workstations. They also have been successfully used as shelf liners for bars and workshops.
In Stock - Ships between May 28 - 29
Raised Grip-Loc liners are easy to maintain and cleaning of these multiuse tiles typically includes:
- Vacuuming any loose debris, dirt, or dust from the tiles.
- Simply hose down the tiles and let the self-draining design allow for the dirt and debris to be swept away.
Raised Grip-Loc Tiles are easy to install. Installation of these floor tiles typically includes:
- Clean your sub floor so that it is free of all dirt, dust, grease, or other foreign material.
- When installing the Grip-Loc tiles, we recommend starting in the front left corner of the room and working your way out from there.
- Make sure the female side (loops) of the tile is facing away from the wall.
- After filling the left wall with tiles and the adjacent wall, proceed to fill the rest of the room with whole tiles.
- When you come up to a wall or object, don’t worry. Just measure the area and cut the tiles with a sharp utility knife and put the trimmed tiles into place.
- When trimming the tiles into place, make sure you leave about a 3/4” space between the tiles and the wall or obstruction.
- Once the tiles are in place, you can then snap in the edge pieces, if you purchased them.