Description - Our premium soft wood trade show kits feature one of our most popular tiles in an easy to assemble display floor kit. Three options are available to choose from; a kit with just tiles, a kit with a carry along bag, and one with a bag that has wheels. These kits will fit a 10' x 10' booth perfectly and will provide you and your guests with the comfort they desire.
Note: This product is not designed for medium to high traffic areas. The wooden design is a thin yet durable veneer like foam surface that can be punctured under sharp animal nails, rough use, high heels, and the wooden pattern is not guaranteed to always line up between interlocking tiles.
Material – Soft wood tiles are constructed of closed cell high density foam that helps ensure they are water proof, odor free, light weight yet durable and insulating.
Size – 2' x 2'.
Thickness – ~14mm
Weight – Each tile weighs approximately 1.88 Lbs.
Recommended Uses – Premium soft wood trade show kits are great for any trade show booth or display area. These tiles will provide you and your visitors with added comfort at discount prices.
In Stock - Ships between Sep 23 - 24
Installation of interlocking tiles is very simple and typically done by the consumer. Typical installation of these tiles is as follows:
- First, clean your sub floor so it is free of all dirt, grease or debris.
- Start in one corner of the room with a corner tile and add border tiles outward along the adjacent walls. Add center, corner, and border tiles where you see fit.
- When coming up to an opposite wall, make sure you cut the tiles to fit the area leaving a gap that’s roughly the thickness of the tiles being used to account for expansion and contraction of the floor tiles in varied temperature ranges.
Note: When piecing interlocking tiles together, adhesives are usually not used since the weight of the locked together product is usually enough to keep the floor tiles from moving. However, if you do experience movement and would like to ensure that the tiles do not slide at all, some double-sided tape or mat tape can be used around the perimeter of the installation to prevent any movement.