8am-8pm EST Monday-Friday
10am-7pm EST Saturday
Complete Your Order
Contact Us
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Daltile Ridgeview Ceramic Tile - Warm Green

Our Price
$1.13 sqft
$16.39 case, covers 14.50 sqft
reg: $1.51 sqft
case: $21.85

Medium variation
Ships between Jun 25 - 27
Color: roll over image to magnify
Warm Green Daltile Ridgeview Ceramic Tile - Warm Green Warm Green

15 tiles per case
12" x 12" Tiles
Accessories for Daltile Ridgeview Ceramic Tile - Warm Green
Description - The Ridgeview series by Daltile is the ultimate flooring option for anyone in need of a highly durable tile offered in a variety of colors at a low cost. This glazed ceramic tile can be installed below, on, and above grade, providing you versatility ease of maintenance unlike other flooring options.
Material – Glazed ceramic.
Size – 12" x 12"
Thickness – 5/16"
Shade Variation – Medium (V2)
Minimum Grout Joint Recommended – 3/16"
Application – Floors, walls, countertops, and exterior patios.
Case Weight – Each case weighs ~40 lbs.
Recommended Uses – Ridgeview tiles are perefct for bathroom installations, basements, kitchen areas, guest rooms, childrens bedrooms, as well as commercial applications such as office buildings, dental offices, cafeterias and more.
  • Ceramic tile flooring typically ships within 5-7 business days and typically delivers within 7-15 business days.
  • Once your flooring ships, an email will be automatically sent to you with your tracking information.
Ceramic tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.


  • Attractive stone look.
  • Residential and commercial.
  • Medium shade variation.
  • Can be installed in any room and on any level of the home.


How to Install Floor Tile

Shipping Video

How to Install Floor Tile thumbnail
How to Install Floor Tile
Shipping Video thumbnail
Shipping Video

Customer Questions & Answers

Don't see what you're looking for?

Ask a Question


Verify that you are human, choose: House


Customer Reviews

results 1-3 of 3

We'd love your feedback! Write a Review
Average Rating

  Replaced old carpet
Installed in
from Plano, TX wrote...
We just needed something durable to replace the carpet we had in our busy family room and this did the trick
  New tile flooring
Self-installed in Kitchen
from Denver wrote...
We watched many videos online and read as many forums as we could find for the installation. That really helped to make it easier and we love the floor
  Tile review
Installed in
from Dallas, TX wrote...
Love it in my bathroom! It's so easy to take care of compared to the rest of the flooring in the house. Trying to talk my husband into installing more in other rooms! Fingers crossed
results 1-3 of 3
< Return to Product