Description - Focal Point carpet tiles by Phenix are the perfect low cost solution to your home or business. Made from olefin, these modular carpet squares are resistant to water, staining and is lower cost compared to nylon products. This attractive carpet tile is backed by a 10 year wear warranty and is designed to be dimensionally stable.
Recommended Installation Pattern - Monolithic, Vertical Ashlar, Horizontal, Brick Ashlar.
Material - Solution dyed Olefin multi-level loop with Corex CT Stable Shield-100% Vinyl backing.
Size - 19.6" x 19.6"
Thickness - 1/4"
Gauge - 1/12"
Weight - ~0.69 Lbs. per square foot.
Traffic Type - Medium - (This Traffic type works well across all uses).
Origin - Made in the USA.
Recommended Uses - Focal Point carpet tiles have been successfully installed in home bedrooms, breakrooms, offices, shops, waiting rooms, and more.
Available For Order - Ships between Jan 29 - Feb 2
Carpet Tile squares do not require special equipment or cleaning products. Maintaining your carpet tiles is as easy as follows:
- To keep your rooms clean and inviting, carpet tiles should be vacuumed frequently.
- Spills should be removed immediately with an absorbent cotton cloth and clean water. For tough stains, you can also easily remove any floor carpet tile to better clean the tile and then easily replace it.
- Periodic maintenance can be performed as needed using a hot water extraction-cleaning machine (I.E. carpet cleaner). Carpet tiles have a backing that prevents water from penetrating or harming the tiles.
For detailed cleaning instructions and commercial cleaning instructions, please
Click Here.
Carpet Tiles are easy to install. Installation of our tiles typically includes:
- In wall to wall installations, tiles can be adhered with double-sided tape or you can use a pressure sensitive adhesive for a more permanent hold. You would apply the adhesive with 1/16" x 1/16" x 1/16" V notch trowel at minimum.
- If you are using the tiles to create a rug, then double-sided tape is all that is required to keep the tiles in place.
- For commercial or permanent installations, the use of a pressure sensitive adhesive or acrylic adhesive would be recommended to keep the tiles in place. Again, you would use at minimum a 1/16" x 1/16" x 1/16" V notch trowel to apply the adhesive.