Complete Your Order
Contact Us
 
8am - 8pm EST Monday - Friday
10am - 7pm EST Saturday

Daltile Kimona Silk

Visual representation of average product rating from all associated reviews using stars
1 reviews
Every Day Low Price! Not eligible for promotions
This product has been discontinued.
Please see comparable products below.
  • Linen look porcelain tile.
  • Residential or commercial uses.
  • Medium shade variation.
  • Multiple modern size options available.
  • Rectified edging.
Description - With a touch of overseas inspiration, the Kimona Silk collection is the perfect addition to any unique and high traffic space. The beautiful textile pattern is complimented by the strength and durability of porcelain. These contemporary tiles are offered in beautiful colors as well as size options sure to look great in any room of the home.
Material – Body Match Porcelain tile with rectified edging.
Size – Available as 12" x 12", 12" x 24", or 24" x 24" tiles.
Thickness – 3/8" (9mm)
Shade Variation – Medium (V2)
Minimum Grout Joint Recommendation – 1/8" (3/16" when rectangular sizes are used in a staggered brick-joint pattern, where the overlap does not exceed 33%)
Application – Floors, walls, countertops, exterior patios.
Breaking Strength – >450 lbs.
Case Weight – Each 12x12 case weighs ~47 lbs, each 12x24 & 24x24 case weighs ~68 lbs.
Recommended Uses – Kimona Silk porcelain tiles are built with high traffic in mind, making them perfect for a variety of commercial and residential applications. Since these floor tiles can be installed on any level, they have been successfully installed in basements, bedrooms, bathrooms, second floors, office buildings, cafeterias, restaurants, salons, retail shops, and much more.
Models: – P320, P323, P325, P327.

Out of Stock - Pre-Order Now

Porcelain tiles are easy to keep clean and maintain. Maintenance of the floor typically includes:
  • Daily or weekly vacuuming or mopping of dirt, grit, dust etc.
  • Place door mats at all entrances to prevent tracked in dirt, rocks, moisture, and other debris.
  • Glazed tiles should be cleaned routinely with an all-purpose, low VOC household or commercial cleaner.
  • The entire area should be cleaned and scrubbed with cleaner solution by using a cotton mop, cloth, sponge, or non-metallic brush.
  • Routine cleaners should never contain hazardous or polluting products including, but not limited to acids or ammonia. Acids can damage the grout and the glazed surface of the tile, while ammonia can cause discoloration of grout.
  • When complete, be sure to rinse the entire area with clean water to remove all cleaning solution residue.
  • For detailed cleaning instructions, please Click Here.
General instructions for installing floor tile:
  • Tile must be installed over structurally sound substrates. Any damaged, loose or uneven areas must be repaired, patched and leveled.
  • Start by marking the center point of the room. Place a row of loose tiles along the center lines in both directions, leaving enough space for uniform joints (use tile spacers).
  • Using the notched side of the recommended trowel, comb adhesive into standing ridges by holding trowel at a 45-degree angle. Remove excess adhesive, leaving a uniform, ridged setting bed. Never spread a larger area than can be set in 15 minutes.
  • Measure tiles to be cut carefully and mark with a pencil or felt-tip pen. Make straight or diagonal cuts with a tile cutter and curved cuts with a nipper. Be sure to mix tiles from several cartons as you set, for a blended effect.
  • Begin installation in the center of the room. Finish each grid before moving to the next. Start with the first tile in the corner of the grid and work outward. Set tiles one at a time using a slight twisting motion. Insert tile spacers as each tile is set. Fit perimeter tiles in each grid last, leaving 1/4" gap between tile and wall.
  • When grid is completely installed, tap in all tiles with a rubber mallet or hammer and wood block, to ensure a good bond and level plane. Remove excess adhesive from joints with a putty knife, and from tile with a damp sponge.
  • Do not walk on tiles until they are set (usually in 24 hours).

Tips for installing large format floor tile:

  • Large size floor tile installation requires particular attention to proper subfloor preparation, grout joint sizing, trowel selection, and mortar coverage.
  • It is absolutely critical that large tile be installed on a level substrate.
  • Installation Requirement: For proper bonding, medium bed mortar should be used in installing tiles with a dimensional length greater than 15 inches on any one side of the tile. Back buttering tiles of this nature in the installation process will also assure proper coverage for body.
For detailed installation instructions, please Click Here.
For printable warranty information, please Click Here.
Don't see what you're looking for? 
No results found.
prev page 1 ... ... next page
prev page PREV
prev page PREV
NEXT next page
NEXT next page
Average Rating
Visual representation of average product rating from all associated reviews using stars
4.0/5.0

Visual representation of product rating from review using stars
  Looks gorgeous- 24x24 size is heavy!
Self-installed in Kitchen, laundry room and solarium
Anonymous from California wrote...
Of course we should've realized that the 24x24 size would be super heavy! Would recommend having a professional install it because it's a bit hard to handle by yourself. Running it through our little 7″ blade tile saw was an adventure! That said, the color is beautiful and the print is strong in the color we got (water chestnut). It really looks awesome installed in the ″log cabin″ pattern that we did. It's a daltile product, so we're confident about the durability and quality.
All Review Images icon View all customer images
Your item was added to the cart
Color:
Qty:
$0.00 total